CNC Multi-Spindle Drilling Machine

MSK100-6

Name: MSK100-6 CNC Five-Sided Drilling Center (Double-Station, Belt Feed)
Brand: JESH DRILL
SKU: MSK100-6

CNC Five-Sided Drilling Center (Double-Station, Belt Feed)

Double-station belt-fed five-sided drilling center with 144 independently driven spindles — four upper-vertical groups and two horizontal groups — drilling the top face and all four sides in one clamping, with barcode scanning and MPR / DXF program generation at 49.5 kW.

Get a Quote Specifications

MSK100-6 CNC Five-Sided Drilling Center (Double-Station, Belt Feed)

380–2440 mm

Processing length

Single panel 120–800 mm / double panel 120–450 mm

Processing width

12–50 mm

Board thickness

40 mm

Max drilling depth

35 mm

Max drilling diameter

144

Drilling spindles

Full specifications (16 items) ↓

Features

CNC Multi-Spindle Drilling Machine — structure and configuration

🎯

Five faces in one clamping

The top face plus the front, rear and both side faces are drilled in one clamping — no panel turnover and no second set-up.

🔁

Double-station feed

Belt or chain feeding runs through stations P1 and P2, so one side drills while the other is loaded.

📲

Scan to run

QR / barcode scanning turns MPR and DXF drawings into machining programs, so changeover needs no manual programming.

Machine photo

Photo from this model page of the 2026 brand catalogue

Note: the image comes from this model page of the catalogue and is for reference only; the delivered machine prevails.

Technical specifications

From this model's specification table in the catalogue (16 items)

Processing length	380–2440 mm
Processing width	Single panel 120–800 mm / double panel 120–450 mm
Board thickness	12–50 mm
Max drilling depth	40 mm
Max drilling diameter	35 mm
Drilling spindles	144
Spindle speed	4800 rpm
Drill motor power	2.2 kW × 10 = 22 kW
Horizontal CNC drill groups	2 groups (8×2 spindles)
Upper-vertical CNC drill groups	4 groups (16×8 spindles)
Feeding	Belt feeding · double station
Total power	49.5 kW
Voltage	380V / 50Hz
Air pressure	0.6–0.8 MPa
Dimensions	6000×3530×2500 mm
Machine weight	approx. 7500 kg

Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.