Products
CNC drilling machine series for panel furniture and custom home furnishing
MSK100-8A
224 independently driven spindles — four upper-vertical groups, two lower-vertical groups and two horizontal groups — drill all six faces in one clamping, with MPR / DXF drawings or a barcode scan turned straight into a program.
- Processing length400-2440 mm
- Processing width120-800 mm
- Board thickness12-50 mm
- Max. drilling depth40 mm
MSK6-4XL
Two-station CNC six-sided driller: two upper drill units of 19 spindles each (6 kW), a 9-spindle lower unit with two high-speed spindle groups, one independent spindle each on the front and rear sides and two on the right side, plus two 3.5 kW routing spindles (7 kW total, 24000 rpm) for grooving and circle milling. One data import drills all six faces without flipping the panel; working length 200–3000 mm, left station 1220 mm wide, right station 800 mm.
- Upper drill spindles19 × 2, 6 kW per unit
- Lower drill spindles9 (2 high-speed groups)
- Working length200 × 3000 mm
- Working widthLeft 100 × 1220 / right 100 × 800 mm
MSK100-4L
80 independently driven spindles with dual-station chain feeding complete five-sided drilling in a single clamping. Barcode scanning plus MPR / DXF import generate the machining program automatically.
- Drill spindles80 (independently controlled)
- Working length300-1500 mm
- Working widthSingle 50-800 mm / double 50-450 mm
- FeedingChain feeding · dual-station
MSK100-7A
180 independently driven spindles with upper-vertical, lower-vertical and horizontal drill groups complete six-sided drilling of a panel in a single clamping. Barcode scanning plus MPR / DXF import generate the machining program automatically.
- Spindles180 (independently controlled)
- Processing length400-2440 mm
- Processing width120-800 mm
- Feeding modeBelt feeding
MSK6-3XL
Three drill units in one machine: two upper units (22 spindles × 2 = 44) and one lower unit (9 × 1 = 9) — 53 spindles covering all six faces — plus two 3.5 kW routing spindles for grooving and circle milling. Import the data once, no panel flipping, one positioning finishes the part.
- Drill spindlesUpper 22×2 = 44 + lower 9×1 = 9, total 53
- Working length80 × 3000 mm
- Working width40 × 1200 mm
- Routing spindles3.5 kW × 2, 18000 rpm
Z6AL
Belt-fed six-row drilling machine with 126 spindles, four lower vertical rows and one horizontal row on each side; 13–16 panels per minute for volume cabinet and wardrobe drilling.
- Processing length250–2440 mm
- Processing width80–800 mm
- Board thickness12–50 mm
- Max drilling depth40 mm
Z4XL
Belt-fed four-row drilling machine with 88 spindles, two lower vertical rows, one horizontal row each side and two positioning rows; 10.1 kW for small-to-medium batches.
- Processing length250–2440 mm
- Processing width120–800 mm
- Board thickness12–50 mm
- Drilling spindles88
Z8XLC
Chain-fed eight-row drill with two working stations and 42 spindles, built for high-cycle drilling of short panels from 250 to 1200 mm.
- Processing length250–1200 mm
- Processing width50–150 mm
- Board thickness12–50 mm
- Drilling spindles42
Z6BXL
Chain-fed six-row high-speed drill with 120 spindles; 13–16 single panels or 20–26 double panels per minute at 16 kW.
- Processing length220–1500 mm
- Processing width50–630 mm
- Drilling spindles120
- Upper vertical rows1 rows
Z10BL
Ten-row chain-fed high-speed drill with 220 spindles, covering more hole combinations in one pass for high-volume cabinet panels.
- Processing length220–2440 mm
- Processing width50–630 mm
- Drilling spindles220
- Upper vertical rows3 rows
Z6BL
Chain-fed continuous six-row drill with 132 spindles, four lower vertical rows and one horizontal row on each side at 16 kW.
- Processing length220–2440 mm
- Processing width50–630 mm
- Drilling spindles132
- Lower vertical rows4 rows
Z5BL
Five-row chain-fed high-speed drill with 110 spindles for panels from 220 to 1500 mm at 13 kW.
- Processing length220–1500 mm
- Processing width50–630 mm
- Drilling spindles110
- Lower vertical rows3 rows
No matching machine found
Try another keyword (for example “drilling”, “six-sided” or “MSK100”), or contact us for a recommendation.
Contact our sales engineersCustomisation and selection
Targeted configuration advice based on panel types, hole patterns and capacity requirements
Custom configuration
Spindle count, stroke and fixtures configurable to your process
Process matching
Parameter advice based on panel size and hole requirements
Training
Operator training and technical documents after delivery