Products

SK5-4L

Four-station CNC stapler placing ten staples per cycle at 4 kW, for continuous stapling of grille and slat panels.

• Processing length600–1200 / 2400 / 2700 / 3000 mm
• Staples per cycle10 pcs
• Total power4 kW
• Machine weightapprox. 1900 kg

MZ14BL

Chain-fed five-sided drill for narrow panels of 50–300 mm width, with 154 spindles across four upper, four lower, two side and four rear horizontal rows at 22 kW.

• Processing length300–2440 mm
• Processing width50–300 mm
• Board thickness12–40 mm
• Drilling spindles154

MZ10BL

Four-sided drill for narrow panels of 50–300 mm width, with 42 spindles in five upper, two lower, side and three rear rows; 13 pieces per minute at 16 kW.

• Processing length250–2440 mm
• Processing width50–300 mm
• Board thickness12–40 mm
• Drilling spindles42

MZ8BL

Five-sided drill for drawer panels with 50–300 mm width and 250–1500 mm length (option up to 2440 mm), 65 spindles at 27 kW.

• Processing length250–1500 mm (option up to 2440 mm)
• Processing width50–300 mm
• Drilling spindles65
• Upper vertical rows2 rows

MZ7BL

Four-sided drill for drawer panels of 50–300 mm width and 250–2500 mm length (2440 mm option), 65 spindles at 25 kW.

• Processing length250–2500 mm (2440 mm option)
• Processing width50–300 mm
• Drilling spindles65
• Upper vertical rows1 rows

MSK100-6

Double-station belt-fed five-sided drilling center with 144 independently driven spindles — four upper-vertical groups and two horizontal groups — drilling the top face and all four sides in one clamping, with barcode scanning and MPR / DXF program generation at 49.5 kW.

• Processing length380–2440 mm
• Processing widthSingle panel 120–800 mm / double panel 120–450 mm
• Board thickness12–50 mm
• Max drilling depth40 mm

MSK100-5

Double-station belt-fed five-sided drilling center with 112 independently driven spindles — three upper-vertical groups and two horizontal groups — drilling the top face and all four sides in one clamping, for panels of 380–2440 mm at 39.6 kW.

• Processing length380–2440 mm
• Processing widthSingle panel 120–800 mm / double panel 120–450 mm
• Board thickness12–50 mm
• Max drilling depth40 mm

MSK100-4

Double-station belt-fed five-sided drilling center with 80 independently driven spindles — two upper-vertical groups and two horizontal groups — drilling the top face and all four sides in one clamping; the smallest belt-fed model in the series at 29.7 kW.

• Processing length380–2440 mm
• Processing widthSingle panel 120–800 mm / double panel 120–450 mm
• Board thickness12–50 mm
• Max drilling depth40 mm