Products

Z6AL

Belt-fed six-row drilling machine with 126 spindles, four lower vertical rows and one horizontal row on each side; 13–16 panels per minute for volume cabinet and wardrobe drilling.

• Processing length250–2440 mm
• Processing width80–800 mm
• Board thickness12–50 mm
• Max drilling depth40 mm

Z4XL

Belt-fed four-row drilling machine with 88 spindles, two lower vertical rows, one horizontal row each side and two positioning rows; 10.1 kW for small-to-medium batches.

• Processing length250–2440 mm
• Processing width120–800 mm
• Board thickness12–50 mm
• Drilling spindles88

Z8XLC

Chain-fed eight-row drill with two working stations and 42 spindles, built for high-cycle drilling of short panels from 250 to 1200 mm.

• Processing length250–1200 mm
• Processing width50–150 mm
• Board thickness12–50 mm
• Drilling spindles42

Z6BXL

Chain-fed six-row high-speed drill with 120 spindles; 13–16 single panels or 20–26 double panels per minute at 16 kW.

• Processing length220–1500 mm
• Processing width50–630 mm
• Drilling spindles120
• Upper vertical rows1 rows

Z10BL

Ten-row chain-fed high-speed drill with 220 spindles, covering more hole combinations in one pass for high-volume cabinet panels.

• Processing length220–2440 mm
• Processing width50–630 mm
• Drilling spindles220
• Upper vertical rows3 rows

Z6BL

Chain-fed continuous six-row drill with 132 spindles, four lower vertical rows and one horizontal row on each side at 16 kW.

• Processing length220–2440 mm
• Processing width50–630 mm
• Drilling spindles132
• Lower vertical rows4 rows

Z5BL

Five-row chain-fed high-speed drill with 110 spindles for panels from 220 to 1500 mm at 13 kW.

• Processing length220–1500 mm
• Processing width50–630 mm
• Drilling spindles110
• Lower vertical rows3 rows

Z4BL

Four-row chain-fed high-speed drill with 88 spindles at 10 kW for small-to-medium batches.

• Processing length220–1500 mm
• Processing width50–630 mm
• Drilling spindles88
• Lower vertical rows2 rows