CNC Six-Sided Drilling / Drilling & Milling

MSK6-3XL

Name: MSK6-3XL CNC 6-Sided Drilling & Milling Machining Line (3-Unit)
Brand: JESH DRILL
SKU: MSK6-3XL

CNC 6-Sided Drilling & Milling Machining Line (3-Unit)

250×3000 mm processing length, 80×1250 mm processing width, 44 top + 9 bottom spindles, 6.6 kW drill motors and 13.5 kW servo power.

Get a Quote Technical consultation

MSK6-3XL CNC 6-Sided Drilling & Milling Machining Line (3-Unit)

250 × 3000 mm

Processing length

80 × 1250 mm

Processing width

12–50 mm

Board thickness

4500 rpm

Main spindle speed

35 mm

Max. drilling diameter

40 mm

Max. drilling depth

Full specifications (23 items) ↓

Features

CNC Six-Sided Drilling / Drilling & Milling — structure and configuration

Six faces in one clamping

Upper and lower packs plus horizontal units finish all six faces without turning the panel.

Drilling and milling

Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.

Line integration

Line or double-station configurations connect to infeed and outfeed as output grows.

Six faces, one clamping

Top and bottom faces plus all four sides, without turning the panel

Swipe sideways to see the full diagram

Top face

Vertical feed

Right side

Horizontal unit feed

Rear side

Horizontal feed

Left side

Horizontal unit · hidden by the panel

Front side

Horizontal feed · hidden by the panel

Bottom face

Feed from below

Conventional route

Several panel turnovers, re-clamping and re-datum each time, so errors stack up

→

MSK6-3XL

One clamping, 6 faces drilled in sequence from the same datum

The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.

Machine photo

Product photo of this model

Note: the image is the product photo of this model and is for reference only; the delivered machine prevails.

Structure and configuration

Figures and captions from this model's product document (MSK6-3XL)

CNC system

Scanning

The system supports barcode and QR code scanning and instantly generates processing programs.

Simulation demonstration

Order import

3D drawing function

View production records

Vertical drilling on upper surface

Vertical drilling of the lower surface

Drilling holes on the right side

Horizontal drilling on front side

Horizontal drilling on rear side

Technical specifications

From this model's product document (23 items)

Processing length	250 × 3000 mm
Processing width	80 × 1250 mm
Board thickness	12–50 mm
Main spindle speed	4500 rpm
Max. drilling diameter	35 mm
Max. drilling depth	40 mm
Air pressure	0.5–0.6 MPa
Drill-motor power	2.2 kW × 3 = 6.6 kW
Voltage	380 V / 50 Hz
Servo motor power	13.5 kW
Fan motor power	1 kW
Dust suction hole diameter	200 mm × 2
Routing & milling spindle (slotting & milling)	3.5 kW × 2 = 7 kW,18000 rpm
Tool dia. / tool handle dia.	6–10 mm / 1/2
Spindle qty. of top drill unit	22 spindles × 2 = 44
Spindle qty. of bottom drill unit	9 spindles × 1 = 9
Z travel speed	36 m/min (upper head servo 1.5 kW, lower head servo 1 kW)
Y axle travel speed	90 m/min (upper head servo 1.5 kW, lower head servo 1 kW)
X axle clamp travel speed	120 m/min (servo 0.75 kW)
Side aligner travel speed	50 m/min (servo 0.75 kW)
Table height	950 mm
Dimensions	8800 × 3100 × 2500 mm (with arms extended)
Machine weight	approx. 3000 kg

Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.